Product Category

More

Type 6014 Plunger valve 3/2 way direct-acting

Location:Home > PRODUCTS > Burkert Fluid Control Product

Type 6014 Plunger valve 3/2 way direct-acting

Body Materials : Brass or stainless steel, polyamide (sub-base)

Sealing material : FKM (EPDM on request)

Medium : Neutral gases and fluids (e.g. compressed air, town gas, natural gas, water, hydraulic oil, petrol). Suitable for technical vacuum

Medium temp. (Polyamide coil (FKM seal)) : -10° to +100 °C (PA coil) to 120 °C Epoxy coil

Orifice : DN1.5 – DN2.5


Details|Hits:2404|Print|Back
Introduction

Valve 6014 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. The coils are moulded with polyamide or with chemically resistant epoxy.


Pulse coils are available for the reduction of electrical power consumption during operation. Optional manual actuation enables quick commissioning and easy maintenance. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.


* Direct-acting, compact valve with diameter of up to DN 2.5


* Vibration-proof, bolted coil system


* Banjo threaded connection for direct mounting on pneumatic valves


* Service-friendly manual override


* Energy-saving pulse versions